| name | price |
| MOTORS |
 | 1,0 cc F1J(P) 06Òîð the World championbcvcxcxzc 1999, 2001, 2003, 2005, 2007
| $ 293.25 |
 | 09Jak 1,5 cc
| $ 162.91 |
 | F1C 15.Top 2.5 cc
| $ 322.58 |
 | F1C 15.Top 2.5 cc with the reduction gearbox and two-bladed a propeller
| $ 586.51 |
 | F1C 15.Top 2.5 cc with the reduction gearbox and three-bladed a propeller
| $ 619.09 |
 | F2A 15.Top 2.5 cc with a tube
| $ 645.16 |
 | F2C 15.Top 2.5 cc
| $ 586.51 |
 | F2D FAI 15.Top 2008 2.5 cc
| $ 193.87 |
 | F2D FAI Fortune F15 the classics 2.5 cc
| $ 192.24 |
 | F2D FAI Fortune F15R 2.5 cc
| $ 190.61 |
 | F2D Faira 2,5 cc
| $ 187.35 |
| Completing and spare parts for models and motors |
| F1B |
Blades F1B a pair
| $ 16.29 |
Propeller Hub F1B simple
| $ 74.94 |
Propeller Hub F1B with variable pitch
| $ 114.04 |
Rubber FAI TAN SUPER SPORT F1B 3 x 1 (0,1 kg)
| $ 293.22 |
Rubber FAI TAN SUPER SPORT F1B 1.5 x 1 (0,1 kg)
| $ 293.22 |
Time clock F1B
| $ 30.92 |
| F1C |
Adaptation for the installation / puttings off of blades from reduction gearbox Gabor
| $ 32.51 |
Propeller F1C two-bladed collapsible for reduction gearbox Gabor (coal-plastic)
| $ 65.10 |
Propeller F1C three-blade collapsible for reduction gearbox Gabor (coal-plastic)
| $ 130.23 |
Propeller F1C four-blade collapsible for reduction gearbox Gabor (coal-plastic)
| $ 130.23 |
Reduction gearbox F1C Gabor for 15.Top
| $ 357.77 |
Reduction gearbox F1C Gabor for 15.Top with a two-blade collapsible propeller
| $ 423.55 |
Reduction gearbox F1C Gabor for 15.Top with a three-blade collapsible propeller
| $ 456.14 |
Reduction gearbox F1C Gabor for 15.Top with a four-blade collapsible propeller
| $ 456.14 |
| F1J(P) |
The head diesel for 06Òîð
| $ 22.15 |
Key for head F1J 06Òîð
| $ 8.34 |
Pair the piston / the sleeve 06Top
| $ 48.84 |
Propeller for 06Top4 F1J(P) single-lobed 150 x 55
| $ 29.29 |
Time clock F1J(P)
| $ 30.92 |
| F2A |
The automatic control unit of stop F2A 15.Top
| $ 19.51 |
Tank F2A 15.Top
| $ 15.93 |
Rocking chair F2A
| $ 5.18 |
Ring rubber heat-resistant for a tube resonant F2A
| $ 10.42 |
Cord steel round 0.4 mm x 37 m
| $ 8.89 |
Wing F2A
| $ 81.42 |
Spar F2A (governed angle of attack)
| $ 30.95 |
Spar F2A hard-anodized c a fillet and a special rocking chair (Ti)
| $ 97.71 |
Engine mount F2À hard-anodized (Cyclone)
| $ 62.56 |
Engine mount F2À hard-anodized (Volley)
| $ 40.04 |
Engine mount F2À hard-anodized (Kostin)
| $ 43.30 |
Pin F2A15Top chromium-plated
| $ 12.21 |
Pair F2A15Top AAC
| $ 81.42 |
Pair F2A15Top ABC
| $ 97.71 |
Connecting rod F2A15Top from a heavy-duty alloy (Japan)
| $ 29.81 |
Connecting rod F2A15Top from a heavy-duty alloy (Japan) with the bronze bush
| $ 30.79 |
Connecting rod F2A15Top from a heavy-duty alloy (Japan) with the aluminium bush
| $ 32.22 |
Propeller F2A bar with a small weight
| $ 32.55 |
Propeller F2A single-lobed, flight-ready (with a counterbalance)
| $ 58.61 |
Stabilizer F2A coal-plastic / balsa
| $ 39.06 |
Tube resonant F2A
| $ 127.07 |
Tail boom F2A coal-plastic / balsa
| $ 68.75 |
Pipeline clamp of strengthening of tube F2A to a motor
| $ 3.09 |
Pipeline clamp of strengthening of tube F2A to model
| $ 6.09 |
| F2C |
Propeller F2C coal-plastic
| $ 16.22 |
Pair piston / trochlea F2C15Top
| $ 140.11 |
Head F2C15Top in the assembly
| $ 35.84 |
Cover back F2C15Top in the assembly
| $ 78.20 |
Cord steel round 0,35mm x 35m
| $ 9.77 |
| F2D |
 | Automatic machine of a stops F2D FAI of 2010 designs of Kalmykov
| $ 24.43 |
Shaft F2D15Top 2008 (+1000 rpm new: material, main bearing, trim, phase)
| $ 52.10 |
Muffler F2D integral PC4 / PC5 / PC6 / PC7 13 cc
| $ 4.85 |
Muffler F2D integral PC4 / PC5 / PC6 / PC7 21 cc
| $ 5.37 |
 | Muffler the Cyclone 2008 (+ 600...800 rpm on any motor)
| $ 13.00 |
Head F2D PC4 / PC5 / PC6
| $ 3.12 |
Head F2D PC7
| $ 1.75 |
Head F2D PC7M / PC8 / PC9 / 15.Top
| $ 5.86 |
Coil for a cord
| $ 2.11 |
Rocking chair / a horn / hinges for model F2D the complete set
| $ 2.11 |
Cone-nut for PC1 / PC2
| $ 1.79 |
Cone-nut for PC3 / PC6
| $ 1.79 |
Cone-nut for PC7 / PC9 / 15.Top
| $ 1.92 |
Ring for muffler F2D fluoroplastic
| $ 0.94 |
Ring for muffler F2D Silicone rubber
| $ 1.27 |
Cover back plastic PC7 / PC7Ì
| $ 4.20 |
Cover back plastic PC8 / PC9
| $ 4.52 |
Hook for a fillet / mufflers, pinch F2D
| $ 4.82 |
Fillet for Air Fight plastic
| $ 0.94 |
Model FAI F2D the Bond - 1 (1 pcs) an engine mount is biased on 5 mm upwards
| $ 32.55 |
Model FAI F2D the Bond - 1 (10 pcs) an engine mount is biased on 5 mm upwards
| $ 293.25 |
Model FAI F2D the Bond - 2 (1 pcs) an engine mount on an axis
| $ 32.58 |
Model FAI F2D the Bond - 2 (10 pcs) an engine mount on an axis
| $ 32.58 |
Model FAI F2D the Bond - 3 (1 pcs) an engine mount is biased upwards on 5 mm
| $ 32.58 |
Model FAI F2D the Bond - 3 (10 pcs) an engine mount is biased upwards on 5 mm
| $ 293.25 |
Model FAI F2D 15. Top1 (1 pcs) an engine mount on an axis
| $ 32.58 |
Model FAI F2D 15. Top1 (10 pcs) an engine mount on an axis
| $ 293.25 |
Model FAI F2D 15. Top2 (1 pcs) an engine mount on an axis
| $ 32.58 |
Model FAI F2D 15. Top2 (10 pcs) an engine mount on an axis
| $ 293.25 |
Set of F2D model
| $ 21.17 |
Engine mount F2D PC7 / PC7M / PC8 (pair)
| $ 8.14 |
 | Engine mount Fortune F15 (approaches for Fora
| $ 11.40 |
Reference spacer of a propeller with cone PC1 / PC2
| $ 3.25 |
Reference spacer of a propeller with cone PC3 / PC6
| $ 3.25 |
Reference spacer of a propeller with cone PC7 / PC7Ì
| $ 3.25 |
Reference spacer of a propeller with cone PC8 / PC9 / 15.Top
| $ 3.25 |
Pair the piston / the sleeve for PC5
| $ 29.32 |
Pair the piston / the sleeve for PC6
| $ 29.32 |
Pair the piston / the sleeve for PC7
| $ 48.87 |
Pair the piston / the sleeve for Fortune F15 (Fora)
| $ 45.61 |
Pair the piston / the sleeve for PC7Ì / PC8 / PC9 / 15.Top
| $ 55.39 |
Cable of 0.67 mm for conclusions on models (1 m)
| $ 0.65 |
Cable of 0.4 mm Italy F2D heavy-duty (33 m)
| $ 7.49 |
Syringe F2D metal
| $ 42.35 |
| UNITS AND FITTING |
The head diesel for 09.JAK
| $ 22.80 |
The head heat for 09.JAK-C
| $ 3.25 |
Metering jet for papillas with the bent union
| $ 5.86 |
Metering jet for a routine tank with the bent union
| $ 11.73 |
The carburettor 15PC4R for 15PC4 2.5 cc
| $ 14.66 |
Cone timer 22 mm ready-assembled for a motor 06Òîð4
| $ 7.49 |
Cone timer / high speed 28 mm in the assembly
| $ 9.12 |
Cone timer / high speed 30 mm in the assembly
| $ 12.70 |
Cone flight 51 mm in the assembly
| $ 0.65 |
The pin
| $ 5.21 |
| KEYS |
Key for head F1J 06Òîð4
| $ 8.47 |
Key for head F1C
| $ 10.42 |
Key for head F2A
| $ 5.53 |
Key for head F2C
| $ 8.47 |
Key for head F2D
| $ 5.21 |
Key coupled for the head / glow plugs
| $ 14.98 |
| FASTENERS |
Propeller Ì2 with an interior hexahedron (20 pcs)
| $ 5.86 |
Propeller Ì2,5 with an interior hexahedron (20 pcs)
| $ 4.56 |
Propeller Ì3 with an interior hexahedron (20 pcs)
| $ 3.25 |
Propeller adjusting Ì2 with an interior hexahedron (20 pcs)
| $ 6.51 |
Propeller adjusting Ì2,5 with an interior hexahedron (20 pcs)
| $ 7.16 |
Propeller adjusting Ì3 with an interior hexahedron (20 pcs)
| $ 7.82 |
| PINS THE PISTON |
 | The pin 4,0 õ 13,0 mm ceramic (nitride of silicon Si3N4)
| $ 48.55 |
The pin 3,5 x 8,5 mm (for a motor 049Top 0,8 cc.)
| $ 5.21 |
The pin 3,5 x 9,5 mm (for motor F1J (P) 06Top 1,0 cc.)
| $ 5.21 |
The pin 4,0 x 10,3 mm (for motors 09Jak 1,5 cc.)
| $ 5.21 |
The pin 4,0 x 11,6 mm (for motors car PS.12 2,0 cc.)
| $ 5.21 |
The pin 4,0 x 12,0 mm (for motors F2D ÐÑ4/ÐÑ5)
| $ 5.21 |
The pin 4,0 x 12,4 mm (for motor F2D FOR A)
| $ 5.21 |
The pin 4,0 x 12,6 mm (for motor F2D PROFI / ZALP)
| $ 5.21 |
The pin 4,0 x 12,8 mm (for motor F2D PC1/PC2/PC3/PC6)
| $ 5.21 |
The pin 4,0 x 13,0 mm (for motors F2D ÐÑ7/ÐÑ8/ÐÑ9/Òîð15/F15)
| $ 5.21 |
The pin 4,0 x 13,0 mm (for motors F1C/F2A/F2C 15Top)
| $ 5.21 |
The pin 4,5 x 12,0 mm (for motor F2D AKM)
| $ 6.51 |
The pin 4,5 x 13,0 mm (for a motor 3,5 cc.)
| $ 6.19 |
The pin 5,0 x 18,0 mm (for motor F3D 40PR 6,5 cc. / F2B Ñ60 10 cc.)
| $ 8.14 |
The pin 7,0 x 17,0 mm (for motor F3D 40Big 6,5 cc.)
| $ 7.16 |
| BEARINGS |
The bearing 6 x 15 x 5 high-precision
| $ 5.21 |
The bearing 6 x 15 x 5 with a backlash 18 / 25 microns a globule of 2,8 mm Japan
| $ 16.29 |
The bearing 7 x 17 x 5 high-precision Russia
| $ 5.21 |
The bearing 7 x 17 x 5 high-precision with backlashes of 0.025 mm Russia
| $ 12.05 |
The bearing 7 x 19 x 6 high-precision Switzerland with backlashes of 0.025 mm
| $ 15.96 |
The bearing 9 x 17 x 4 (the textolite separator) Germany
| $ 22.48 |
The bearing 4 x 11 x 4 high-precision (the plastic separator) Japan
| $ 9.77 |
The bearing 12 x 21 x 5 globule 2.381 Japan
| $ 9.77 |
The bearing 12 x 21 x 5 ceramic globules 2.381 Japan
| $ 14.66 |
The bearing 15 x 24 x 5 ceramic globules 2.381
| $ 17.92 |
Globule ceramics USA diameter of 2,381 mm
| $ 0.32 |
Globule ceramics USA diameter of 3,500 mm
| $ 0.65 |
| PISTONS |
The piston diameter 11,5 x 10 F1J 236
| $ 9.77 |
The piston diameter 15,3 x 14,3 F2D Dispal
| $ 10.42 |
The piston diameter 15,3 x 14,3 F2D Japan
| $ 11.40 |
The piston diameter 15,3 x 14,3 F2D 236
| $ 8.14 |
The piston material heat resisting (Japan) diameter of 18 mm length of 1 m
| $ 325.83 |
| GASKETS |
Gaskets under the head a gang 0.05 x 10 x 18 mm a nickel (10)
| $ 1.46 |
Gaskets under the head a gang 0.05 x 10.3 x 18 mm a nickel (10)
| $ 1.46 |
Gaskets under the head a gang 0.05 x 11.2 x 18 mm a nickel (10)
| $ 1.46 |
Gaskets under the head a gang 0.05 x 12.4 x 18 mm a nickel (10)
| $ 1.46 |
Gaskets under the head a gang 0.05 x 14 x 20 mm a nickel (10)
| $ 1.46 |
Gaskets under the head a gang 0.05 x 15 x 20.5 mm a nickel (10)
| $ 1.46 |
Gaskets under the head a gang 0.05 x 15 x 21 mm a nickel (10)
| $ 1.46 |
| DEVICES |
Tachometer of a sound AT-3 for sensing turnovers of a motor of 7-60 thousand ground / flight
| $ 423.52 |
Tachometer sound ST-01 for sensing turnovers of a motor of 20-70 thousand ground / flight with memory
| $ 228.08 |
The device of an entry in flight (a velocity of flight, temperature, turnovers of a motor)
| $ 391.00 |
| PROPELLERS |
Propeller F2D of Seryogin
| $ 3.22 |
Propeller F2C coal-plastic
| $ 13.03 |
Propeller for 06Top4 F1J(P) single-lobed 150 x 55
| $ 19.55 |
Propeller AKM from Zhuravlyov metal form (bar)
| $ 3.25 |
Propeller AKM from Zhuravlyov metal form
| $ 3.91 |
| SUPPOSITORIES |
 | Suppository Nelson HD
| $ 5.53 |
 | Suppository Nelson G/B (a strand of 0,2 mm)
| $ 9.77 |
| Suppository Nelson G/B heavy (a strand of 0,3 mm)
| $ 10.75 |
 | Nut for strengthening glow bee such as Nelson G/B
| $ 1.62 |
 | Suppository Nelson G/B big (with the c own combustion chamber)
| $ 13.03 |
 | Nut for strengthening glow bee such as Nelson G/B big
| $ 3.25 |
| $ 9.77 |
Accumulator for glow bee 10 A/h 2V
| $ 30.95 |
| Tuned pipe |
Tuned pipe for F2A 2,5 cc.
| $ 81.45 |
 | Tuned pipe for F3D FAI models 6,6 cc for 2009 seazon
| $ 97.75 |
Tuned pipe for 6.6 cc 2005 275 mm
| $ 129.91 |
| CONNECTING RODS |
Connecting rod 06Òîð4 without bushes
| $ 9.12 |
Connecting rod F2D PC4 / PC5 / PC6 without bushes
| $ 8.14 |
Connecting rod F2D PC4 / PC5 / PC6 with one bush
| $ 9.44 |
Connecting rod F2D PC7 / PC7Ì / PC8 / PC9 without bushes
| $ 8.47 |
Connecting rod F2D PC7 / PC7Ì / PC8 / PC9 with two bushes
| $ 14.66 |
Connecting rod F1C / F2A / F2C / F2D15. Top without bushes
| $ 19.22 |
Connecting rod F1C / F2A / F2C / F2D15. Top with two bushes
| $ 22.48 |
Connecting rod F2D Fortune 15 (Fora) with the bronze bush
| $ 11.40 |
Connecting rod F2D Fortune 15 (Fora) from a heavy-duty material (Japan) with the bronze bush
| $ 22.48 |
Material for the Connecting rod heavy-duty 75 kg / mm.sq. (Japan) diameter of 22 mm x 1 m
| $ 325.83 |
| MATERIALS |
 | Ceramic neurosurgeons knife 75 mm
| $ 32.25 |
The Nano-modifier (NM) 1 ml
| $ 4.88 |
Kevlar a tissue of 0.25 mm (1 m)
| $ 16.29 |
Cord steel round 0.3 mm x 34 m
| $ 4.88 |
Cord steel round 0.4 mm x 39 m
| $ 8.47 |
Lavsan F2D of 0.025 mm (1 kg - 46 meters)
| $ 25.41 |
Lavsan F1B of 0.010 mm (1 m)
| $ 1.62 |
Oil castor 1 l
| $ 8.14 |
Oil synthetics of 1 l (adds velocity F2D up to 4 %)
| $ 19.55 |
Nitromethane of super-high clearing of 99,9 % 100 ml
| $ 4.88 |
The piston material heat resisting (Japan) diameter of 18 mm length of 1 m
| $ 325.83 |
Glass-wool blanket of 0.03 mm (1 m)
| $ 13.03 |
Glass-wool blanket of 0.05 mm (1 m)
| $ 9.77 |
Glass-wool blanket of 0.07 mm (1 m)
| $ 6.51 |
Glass-wool blanket of 0.10 mm (1 m)
| $ 4.88 |
Glass-wool blanket of 0.15 mm (1 m)
| $ 6.19 |
Tube Latex for tanks - papillas F2D yellow (1 m)
| $ 9.77 |
Tube Latex for tanks - papillas F2D brown (1 m)
| $ 9.77 |
Tube Latex for tanks - papillas F2D black (1 m)
| $ 9.77 |
Tube Brass 3x2 mm (1 m)
| $ 3.25 |
Tube Brass 3x2 mm (1 kg)
| $ 19.55 |
Tube Silicone (d x D) 2 x 5 soft (1 m)
| $ 2.28 |
Tube Silicone (d x D) 2 x 5 rigid (1 m)
| $ 2.93 |
Tube Silicone (d x D) 2 x 6 soft (1 m)
| $ 2.60 |
Tube Silicone (d x D) 10 x 14 (1 m)
| $ 13.03 |
Coal-fibre (1 m)
| $ 0.32 |
Coal-fabric 0.08 x 220 mm (1 m)
| $ 13.03 |
Coal-fabric of 0.14 mm x 280 (1 m)
| $ 19.55 |
Printing
