Scientists of Russia make outbreak in Nano - process engineerings. The offered Nano - modifier (Nano - cover) is the brightest representative of a set of antifriction wear-resistant and heat-resistant covers. Reduces a sliding friction in 6 - 8 times, static friction in 100 times.
On a stop watch after impregnation of details of a motor the velocity of models is enlarged on 2 - 5 % depending on a pre-set tuning of a motor, reduction gearboxes and transmissions on 3 - 6 %. To same resource of a motor and reduction gearboxes in 2 - 3 times is enlarged.
The velocity adds cover of model (1 - 2 %), and a propeller (1 - 3 %), and at free-flying models after handling a wing and the stabilizer are enlarged flight time (3 - 5 %).
Impregnation of Cordobas (cables) too adds a velocity on 1 - 2 %, improves a controllability model, especially in Air I Fight at a foul with the contender. Nano - cover bull corrosion inhibition for cables and Cordobas. The impregnated cord (cable) can be not dried after flights during a rain.
Handling of details of a motor reduces temperature of a motor on 10 - 15 oÑ, the motor finish squeezing (or to increase quantity of nitromethane) allows and to receive an increase of turnovers. Padding selection of a propeller and a volume of the combustion chamber yields a padding increase of a velocity.
Well treated pair the piston / sleeve is not fixed in a TDC even at a short stroke of the piston up to a TDC in 3 - 4 mm (it is interference of the piston 9 - 12 microns !) and jumps out back !
The component of the Nano-modifier in fuel as allows to accumulate a protecting film on rubed. Friction is reduced in 1,5 - 2 times, and wearing in 3 - 5 times. The Nano-modifier of fuel has one more very useful effect - it reduces surface tension of fuel(oil) in 10000 times! Sputtering of fuel becomes more small-sized many times over. In outcome fuel burns down with all consequences implying from here better and more full: it is more than turnovers, the condition is more stable, the consumption of fuel is less on 15 - 20 % (it is especially important for racers F2C) !
It is a little bit versions of handling of details of a motor:
Airmodelling rubber for gummi-motor-models F1B increases an energy-conversion efficiency on 5 - 10 %
Treated the receiver and machines of radio control serve as Nano - impregnation longer and some water are not afraid. Receivers, wires and machines continue to work perfectly completely steeped in water without a guard. Machines consume less power supplies, serve in 2-3 times longer, rustle less.
The modifier completely ecologically safe.
So, for example, application of Nano - cover in mechanical engineering, tool production allows:
In a woodworking industry use of Nano-cover is efficient as the antiadhesion structures during sawing up and planing of saw-timbers from wood. Handling by Nano-cover of a surface of the instrument and working tables allows to exclude completely practically sticking of wood resin to the treated metal surfaces. Handling of clusters of friction of devices in the îïòèêî-mechanical industry allows to lower a friction coefficient (to 10 times), the moment of a break-out, wearing of clusters of friction and to prevent supercritical shift of grease oils. At handling details, units and clusters of radio electronic instrumentation application of Nano - cover allows to exclude completely the conventional lacquer coats ensuring a moisture protection and rust resistance. In the hour industry application of Nano-cover improves reliability, an exactitude of a course and a warranty period of activity of clockworks. As a result of handling by Nano-cover of palladic potentiometric pathes and ïàëëàäèåâî-rhodic contacts (in airinstrument making) it is suppressed catalytic activity of the indicated metals in a medium of damping and keeping up liquids, considerably improves sensitivity, reliability and durability of devices. Nano-cover also allows to transfer industrial rubber goods in the raised class of reagent resistance, and also to lower thickness of precious covers.
The effect of a drop of friction of surfaces about air is already used in a civil aviation - airplanes water with the Nano - modifier, reducing on some tons the consumption of fuel for flight. The surface becomes slippery as at fluoroplastic. Thus the dust and water do not adhere to a surface.
Yachtsmen cover the yachts, reduce time of rapid motion. Water-motormen - propellers and the bottom of a boat, a boat go out on a gliding more easy, is picked up speed, pass a distance faster. Lugers smear runners, and receive outcomes above on 5 - 10 %. At them lubrications are prohibited, and Nano - impregnation is not determined è-for transparences and Nano - dimensions of 40-80 nanometers (it is 0,00004 - 0,00008 mm). Jumpers from a springboard and the master of high speed descent smear the skis (does not abrade on a line as other lubrications). Race drivers add the Nano - modifier in oils of a motor, a transmission, a hydraulic actuator (does not litter an orifice and it is not filtered off). Cover ignition systems, a windshield (water-repellent effect), the component in a diesel oil prolongs service life of the pump of a drive in 2 - 3 times. In collector electric motors cover collector lamels. In microelectronics - as - Nano - cover holds bull electroisolator up to 8000 volt. In building - the component in concrete - hardening on 20 %. In a casting of plastic - stability of moulds in 6 - 8 times is increased, substitutes chromizing. In lubrication of machine tools with CPU - the exactitude of positioning is increased in 2 - 3 times. The cutting instrument (incisors, burrs, files, planes, drills, development, taps) - after cover time from sharpening before sharpening grows in 5 - 8 times. Spinnerets for stretching out of a strand serve in 10 times longer.