Longly a course the engine 15Kaz for the timer model FAI F1C
Specification:
- volume 2.5 cc
- stroke 16 mm
- diameter of the piston 14 mm
- MAX power 1.4 h/p on 38000 rev/min with a propeller - club propeller, on standard fuel 20/80
- power on the ground 1.04 h/p
- on a move the moment and 28000 RPM
- on a working propeller 200 x 70 mm x 1 blade
- shaft in diameter 15 mm
- shaft journal 6 x 5 mm is chromeplated
- front bearing 8 õ 19 mm
- rear bearing 15 õ 24 mm
- the sleeve has two channels
- the piston cast with a deaf aperture under a finger in diameter of 5 mm with a fluoroplastic fuse instead of the lock rings, sliding on a mirror of the cylinder
- weight of the motor 179 g
- installation on model - a back flange of a crank case of 41 mm in diameter or it is traditional
- recommended propeller - single-blade, coal, not collapsible, 200 õ 70 mm
- the power supply system - a dummy as on model of air fight
- System of a stop of the motor - fill up from a dummy directly in channels (the motor is supplied with the special union)
- threaded - diameter up to 10 mm with a cover