RUSENGINES.RU - The order of replacement of the piston РС7-8-9

To unscrew a back cover.
To weaken a candle.
To unscrew a nut of the head.
To take out the sleeve together with the head.
To shift a connecting rod on a shaft in an extreme back rule (when the piston in the upper dead point).
Using the L-shaped lever to hook on a connecting rod and to remove it from a shaft (the sketch of the lever is enclosed) with light force and to change application points of force to a connecting rod (as though to swing on the right / at the left).
To take out one lock ring.
To drag the pin.
To replace the piston.
To collect a connecting rod / the piston / the pin, having greased the pin castor oil.
To insert the lock ring.
To grease with castor oil and to dress a connecting rod on a shaft (the piston in the upper dead point) having applied light force on a connecting rod a plastic emphasis. A marker on Deckel the piston - aside Auspuff.
To insert the sleeve with the head (orienting a groove of the sleeve on a pin in a casing).
To grease a nut with castor oil and to postpone the stall the head.
To postpone the stall a candle.
To grease a thread with castor oil, to twist and postpone the stall a back cover.